Idea
In short
How do you build a fall detection learning demo?
A small board learns the pattern of a drop from an accelerometer, as a learning exercise only and not a safety device. You need ESP32-S3 DevKitC-1, ADXL345 accelerometer and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 420 min
- Parts
- 3
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Classify motion with a tiny model.
Parts list
- Development Boards
- Sensors
- Prototyping
How to build it
- Record normal motion
- Record drops onto a cushion
- Train a small model
- Run it on the board
- Discuss why this is a demo only
Common questions
What parts do I need for the fall detection learning demo?
ESP32-S3 DevKitC-1, ADXL345 accelerometer and Breadboard 830 Tie Points.
How long does the fall detection learning demo take to build?
About 420 minutes for a advanced maker.
