Projects / Ideas / Voice wake-word light

Voice wake-word light

AdvancedEdge AIIdeaReviewed
In short

How do you build a voice wake-word light?

A wake word on an ESP32-S3 switches a lamp on and off without sending audio to the cloud. You need ESP32-S3 DevKitC-1, MAX98357A I2S amplifier breakout, Electret microphone (capsule) and Breadboard 830 Tie Points.

Level
Advanced
Time
About 360 min
Parts
4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Run a speech model on a microcontroller.

How to build it

  1. Capture microphone audio
  2. Run a wake-word model
  3. Trigger a switch
  4. Beep to confirm
  5. Test in a quiet and a noisy room

Related projects

Common questions

What parts do I need for the voice wake-word light?

ESP32-S3 DevKitC-1, MAX98357A I2S amplifier breakout, Electret microphone (capsule) and Breadboard 830 Tie Points.

How long does the voice wake-word light take to build?

About 360 minutes for a advanced maker.