Idea
In short
How do you build a keyword-spotting switch?
A microphone and a tiny model recognise the words on and off to switch an LED. You need ESP32-S3 DevKitC-1, MAX4466 microphone module, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 420 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Run keyword spotting on a microcontroller.
Parts list
- Development Boards
- Sensors
- Semiconductors
- Passives
- Prototyping
How to build it
- Record samples of each word
- Train a small model
- Convert with quantisation
- Run on the board
- Test in a noisy room
Common questions
What parts do I need for the keyword-spotting switch?
ESP32-S3 DevKitC-1, MAX4466 microphone module, LED 5 mm red, Resistor 220 Ω and Breadboard 830 Tie Points.
How long does the keyword-spotting switch take to build?
About 420 minutes for a advanced maker.
