Electret microphone (capsule)
Small microphone capsule. Needs a bias resistor and amplifier.
FunctionElectret condenser mic
Supply voltage2 to 10 V bias through a resistor
RatingSensitivity about −44 dB
AudioReviewedMPN CMA-4544 / 9mmUsed in 10 projects
In short
What is the Electret microphone (capsule) and what is it used for?
Small microphone capsule. Needs a bias resistor and amplifier. Makers use it for sound detection.
How it works
A charged membrane forms a capacitor whose voltage changes with sound, buffered by a built-in FET.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Electret condenser mic |
| Supply voltage | 2 to 10 V bias through a resistor |
| Rating | Sensitivity about −44 dB |
Pinout
Case pinGND
Other pinOutput (needs bias)
How to use it
Bias it with 2.2 kΩ to 10 kΩ from VCC and couple out through a 1 µF capacitor into an amplifier. Use a MAX4466 module for an easy start.
Applications
Sound detection
Builds that use it
Guided build
Electret microphone preamp
Guided build
Two-room wired intercom
Guided build
Two-mic karaoke mixer
Idea
Dawn chorus recorder
Idea
Sound-triggered recorder
Idea
Low-power FM transmitter study
Idea
Big-button speed dialler
Idea
Bat detector
Showing 8 of 10
Alternatives
- MAX4466 microphone moduleWith amplifier
- MAX9814 microphone with AGCWith auto gain
Common questions
What is the Electret microphone (capsule) used for?
In maker projects: sound detection.
How does the Electret microphone (capsule) work?
A charged membrane forms a capacitor whose voltage changes with sound, buffered by a built-in FET.
What voltage does the Electret microphone (capsule) need?
2 to 10 V bias through a resistor.
What can I use instead of the Electret microphone (capsule)?
MAX4466 microphone module and MAX9814 microphone with AGC.
