Idea
In short
How do you build a low-power FM transmitter study?
A one-transistor oscillator at 88 to 108 MHz shows how FM works, kept to a very short range for legal use. You need BF494 RF transistor, Enamelled copper wire (magnet wire, 0.3 mm), Ceramic capacitor 22 pF × 2, Ceramic capacitor 1 nF, Resistor 10 kΩ × 2, Electret microphone (capsule), 9 V battery, 9 V battery snap with DC jack and Copper clad board (single side) 10 × 15 cm.
- Level
- Advanced
- Time
- About 180 min
- Parts
- 9
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand RF oscillators and frequency modulation.
Parts list
- Semiconductors
- Cables & Wires
- Passives
- Passives
- PassivesResistor 10 kΩ × 2
- Audio
- Batteries
- Power
- Prototyping
How to build it
- Wind a small air-core coil
- Build the Colpitts oscillator
- Tune a radio to find it
- Modulate with the mic
- Keep power tiny and check local radio rules
Related projects
Common questions
What parts do I need for the low-power FM transmitter study?
BF494 RF transistor, Enamelled copper wire (magnet wire, 0.3 mm), Ceramic capacitor 22 pF × 2, Ceramic capacitor 1 nF, Resistor 10 kΩ × 2, Electret microphone (capsule), 9 V battery, 9 V battery snap with DC jack and Copper clad board (single side) 10 × 15 cm.
How long does the low-power FM transmitter study take to build?
About 180 minutes for a advanced maker.
