Idea
In short
How do you build a big-button speed dialler?
Three large picture buttons call family members through a GSM module, for elderly users. You need Arduino Nano, SIM800L GSM module, Arcade push button 30 mm × 3, Speaker 8 Ω 0.5 W, Electret microphone (capsule), TP4056 module with protection (USB-C), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make a simple, reliable calling device.
Parts list
- Development Boards
- Wireless
- Switches
- Motors & Actuators
- Audio
- Power
- Batteries
- Power
How to build it
- Wire big buttons with photos
- Dial the stored number on press
- Show call state with an LED
- Answer incoming calls with any button
- Run on battery during power cuts
Common questions
What parts do I need for the big-button speed dialler?
Arduino Nano, SIM800L GSM module, Arcade push button 30 mm × 3, Speaker 8 Ω 0.5 W, Electret microphone (capsule), TP4056 module with protection (USB-C), 18650 cell 2600 mAh (branded) and Battery holder 18650 single.
How long does the big-button speed dialler take to build?
About 240 minutes for a intermediate maker.
