Components / Motors and drivers / DRV8833 dual motor driver

DRV8833 dual motor driver

Small, efficient driver for two low-voltage motors.

FunctionDual H-bridge
Supply voltage2.7 to 10.8 V
InterfaceTwo PWM inputs per motor
RatingAbout 1.2 A per channel
Motor DriversReviewedMPN DRV8833Used in 5 projects
In short

What is the DRV8833 dual motor driver and what is it used for?

Small, efficient driver for two low-voltage motors. Makers use it for battery robots with N20 motors.

How it works

Two MOSFET H-bridges with low on-resistance, so little voltage is lost compared with the L293D.

Key specifications

Interface module specValue
FunctionDual H-bridge
Supply voltage2.7 to 10.8 V
InterfaceTwo PWM inputs per motor
RatingAbout 1.2 A per channel
Logic level3.3 or 5 V

Pinout

AIN1 AIN2Motor A inputs
BIN1 BIN2Motor B inputs
AOUT1 AOUT2 BOUT1 BOUT2Motor outputs
VM2.7 to 10.8 V
nSLEEPHigh to run (often pulled up)
nFAULTLow on fault
GNDGround

How to use it

PWM one input and hold the other low to set speed and direction. Good for N20 and small BO motors on 1S to 2S batteries.

Applications

Alternatives

Buy at

Common questions

What is the DRV8833 dual motor driver used for?

In maker projects: battery robots with N20 motors.

How does the DRV8833 dual motor driver work?

Two MOSFET H-bridges with low on-resistance, so little voltage is lost compared with the L293D.

What voltage does the DRV8833 dual motor driver need?

2.7 to 10.8 V.

How do I connect the DRV8833 dual motor driver to an Arduino or ESP32?

Two PWM inputs per motor. Pins: AIN1 AIN2 (Motor A inputs), BIN1 BIN2 (Motor B inputs), AOUT1 AOUT2 BOUT1 BOUT2 (Motor outputs), VM (2.7 to 10.8 V), nSLEEP (High to run (often pulled up)), nFAULT (Low on fault).

What can I use instead of the DRV8833 dual motor driver?

TB6612FNG Motor Driver and MX1508 dual motor driver.