Idea
In short
How do you build a camera robot you drive from a browser?
An ESP32-CAM streams video and drives two motors, so you can explore a room from your phone. You need ESP32-CAM, ESP32-CAM-MB programmer board, DRV8833 dual motor driver, Robot car chassis kit 2WD (acrylic), Battery holder 18650 2S (series), 18650 cell 2600 mAh (branded) × 2 and Mini-360 buck converter.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Combine a video stream and motor control on one ESP32 without starving either.
Parts list
- Development Boards
- Interfaces
- Motor Drivers
- Mechanical & Hardware
- Power
- Batteries
- Power
How to build it
- Start from the camera stream build
- Use two free GPIOs per motor with the DRV8833
- Add buttons on the page that send drive commands
- Run the stream on one core and control on the other
- Stop the motors when the page is closed
Common questions
What parts do I need for the camera robot you drive from a browser?
ESP32-CAM, ESP32-CAM-MB programmer board, DRV8833 dual motor driver, Robot car chassis kit 2WD (acrylic), Battery holder 18650 2S (series), 18650 cell 2600 mAh (branded) × 2 and Mini-360 buck converter.
How long does the camera robot you drive from a browser take to build?
About 300 minutes for a advanced maker.
