MX1508 dual motor driver
Very cheap tiny driver for two small motors.
FunctionDual H-bridge
Supply voltage2 to 10 V
RatingAbout 1.5 A per channel
Logic level3.3 or 5 V
Motor DriversReviewedMPN MX1508Used in 3 projects
In short
What is the MX1508 dual motor driver and what is it used for?
Very cheap tiny driver for two small motors. Makers use it for toy cars.
How it works
A dual MOSFET H-bridge chip.
Key specifications
| Interface module spec | Value |
|---|---|
| Function | Dual H-bridge |
| Supply voltage | 2 to 10 V |
| Rating | About 1.5 A per channel |
| Logic level | 3.3 or 5 V |
Pinout
IN1 IN2Motor A
IN3 IN4Motor B
MOTOR-A MOTOR-BOutputs
+ -2 to 10 V supply
How to use it
PWM one input of each pair and hold the other low. There is no enable pin. Fine for small robot cars on 2 AA to 2S Li-ion.
Applications
Toy cars
Builds that use it
Alternatives
- DRV8833 dual motor driverBetter protected
- L9110S dual motor driverSimilar low-cost driver
Common questions
What is the MX1508 dual motor driver used for?
In maker projects: toy cars.
How does the MX1508 dual motor driver work?
A dual MOSFET H-bridge chip.
What voltage does the MX1508 dual motor driver need?
2 to 10 V.
What can I use instead of the MX1508 dual motor driver?
DRV8833 dual motor driver and L9110S dual motor driver.
