BMP280 pressure sensor
Barometric pressure and temperature sensor. No humidity (that is the BME280).
What is the BMP280 pressure sensor and what is it used for?
Barometric pressure and temperature sensor. No humidity (that is the BME280). Makers use it for altitude, weather trend.
A tiny silicon membrane flexes with air pressure, and piezoresistive elements on it change resistance.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Pressure and temperature |
| Range | 300 to 1100 hPa, −40 to 85 °C |
| Accuracy | ±1 hPa, ±1 °C |
| Interface | I2C or SPI |
| I2C address | 0x76 or 0x77 |
| Supply voltage | 1.71 to 3.6 V (modules often have a regulator) |
Pinout
How to use it
Use the Adafruit BMP280 library at address 0x76 (SDO to ground) or 0x77. Altitude from pressure needs your local sea-level pressure for accuracy; changes in altitude are measured much better than absolute altitude.
Applications
Builds that use it
Alternatives
- BME280 Environmental SensorAdds humidity
- MS5611 barometric pressure sensorHigher resolution for altimeters
Common questions
What is the BMP280 pressure sensor used for?
In maker projects: altitude, weather trend.
How does the BMP280 pressure sensor work?
A tiny silicon membrane flexes with air pressure, and piezoresistive elements on it change resistance.
What voltage does the BMP280 pressure sensor need?
1.71 to 3.6 V (modules often have a regulator).
How do I connect the BMP280 pressure sensor to an Arduino or ESP32?
I2C or SPI. Pins: VCC (3.3 V (some boards accept 5 V)), GND (Ground), SCL (I2C clock or SPI SCK), SDA (I2C data or SPI SDI), CSB (Chip select, leave high for I2C), SDO (Address select 0x76 or 0x77, or SPI SDO).
What can I use instead of the BMP280 pressure sensor?
BME280 Environmental Sensor and MS5611 barometric pressure sensor.
