Projects / Ideas / High-altitude style logger on a hill

High-altitude style logger on a hill

IntermediateEnvironmentIdeaReviewed
In short

How do you build a high-altitude style logger on a hill?

A small logger records pressure and temperature as you climb a hill and estimates altitude. You need Arduino Nano, BMP280 pressure sensor, MicroSD Card Module, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Estimate altitude from pressure.

How to build it

  1. Read pressure and temperature
  2. Compute altitude from a sea-level reference
  3. Log to the SD card
  4. Walk a hill with the logger
  5. Compare with a map

Related projects

Common questions

What parts do I need for the high-altitude style logger on a hill?

Arduino Nano, BMP280 pressure sensor, MicroSD Card Module, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

How long does the high-altitude style logger on a hill take to build?

About 180 minutes for a intermediate maker.