MS5611 barometric pressure sensor
Very precise pressure sensor used in drones and variometers.
MeasuresPressure and temperature
Range10 to 1200 mbar
InterfaceI2C or SPI
Supply voltage1.8 to 3.6 V
SensorsReviewedMPN MS5611-01BA03Used in 4 projects
In short
What is the MS5611 barometric pressure sensor and what is it used for?
Very precise pressure sensor used in drones and variometers. Makers use it for drone altitude hold.
How it works
A piezoresistive MEMS pressure sensor with a 24-bit ADC and factory calibration coefficients.
Key specifications
| Sensor spec | Value |
|---|---|
| Measures | Pressure and temperature |
| Range | 10 to 1200 mbar |
| Interface | I2C or SPI |
| Supply voltage | 1.8 to 3.6 V |
Pinout
VCC3.3 to 5 V on modules
GNDGround
SCLI2C or SPI clock
SDAI2C data or SPI
CSBI2C address or SPI select
SDOSPI data out
PSInterface select, high for I2C
How to use it
Used in drones and variometers for its 10 cm altitude resolution. Shield it from light and airflow, which disturb fast readings.
Applications
Drone altitude hold
Builds that use it
Alternatives
- BMP280 pressure sensorCheaper, good enough for weather
Common questions
What is the MS5611 barometric pressure sensor used for?
In maker projects: drone altitude hold.
How does the MS5611 barometric pressure sensor work?
A piezoresistive MEMS pressure sensor with a 24-bit ADC and factory calibration coefficients.
What voltage does the MS5611 barometric pressure sensor need?
1.8 to 3.6 V.
How do I connect the MS5611 barometric pressure sensor to an Arduino or ESP32?
I2C or SPI. Pins: VCC (3.3 to 5 V on modules), GND (Ground), SCL (I2C or SPI clock), SDA (I2C data or SPI), CSB (I2C address or SPI select), SDO (SPI data out).
What can I use instead of the MS5611 barometric pressure sensor?
BMP280 pressure sensor.
