Idea
In short
How do you build a floor climbed counter?
A pressure sensor notices when you climb a floor and counts them, like a fitness band does. You need Arduino Nano, BMP280 pressure sensor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Count floors with pressure.
Parts list
- Development Boards
- Sensors
- Displays
- Switches
- Prototyping
How to build it
- Wire the sensor on I2C
- Read pressure and convert to height
- Smooth the height
- Count each three metres up
- Reset with a button
Related projects
Common questions
What parts do I need for the floor climbed counter?
Arduino Nano, BMP280 pressure sensor, SSD1306 OLED Display, Tactile push button 6 mm and Breadboard 830 Tie Points.
How long does the floor climbed counter take to build?
About 210 minutes for a intermediate maker.
