Projects / Ideas / Breath flute

Breath flute

IntermediateAudio & MusicIdeaReviewed
In short

How do you build a breath flute?

Blow gently into a short tube over a pressure sensor and three buttons choose the note, with the volume following your breath. A fun first wind instrument that shows how a pressure sensor feels a puff. Use your own clean tube and never share a mouthpiece. You need Arduino Nano, BMP280 pressure sensor, Tactile push button 6 mm × 3, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 90 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Play notes by blowing and pressing buttons.

How to build it

  1. Read the air pressure in the tube
  2. Take away the resting value
  3. Pick the note from three buttons
  4. Play the note while you blow
  5. Add a gentle way to set the loudness

Related projects

Common questions

What parts do I need for the breath flute?

Arduino Nano, BMP280 pressure sensor, Tactile push button 6 mm × 3, Passive buzzer, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the breath flute take to build?

About 90 minutes for a intermediate maker.