Idea
In short
How do you build a model rocket altimeter and parachute deploy?
A barometer detects the top of the flight and fires a servo to release a parachute. You need Arduino Nano, BMP280 pressure sensor, SG90 Micro Servo, Li-Po battery 3.7 V 500 mAh, MicroSD Card Module and SanDisk microSD card 32 GB (A1, Class 10).
- Level
- Advanced
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect apogee and trigger a release.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Batteries
- Interfaces
- SBC Accessories
How to build it
- Log pressure during flight
- Detect apogee when altitude stops rising
- Move the servo to release
- Save the flight
- Use only a small, legal model rocket
Common questions
What parts do I need for the model rocket altimeter and parachute deploy?
Arduino Nano, BMP280 pressure sensor, SG90 Micro Servo, Li-Po battery 3.7 V 500 mAh, MicroSD Card Module and SanDisk microSD card 32 GB (A1, Class 10).
How long does the model rocket altimeter and parachute deploy take to build?
About 360 minutes for a advanced maker.
