Idea
In short
How do you build an altitude trip logger?
A pressure sensor logs altitude changes on a hike or bus ride to a card. You need Arduino Nano, BMP280 pressure sensor, MicroSD Card Module, DS3231 RTC module, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Turn pressure into height and log it.
Parts list
- Development Boards
- Sensors
- Interfaces
- Sensors
- Displays
- Prototyping
How to build it
- Read pressure
- Compute altitude from a set sea-level pressure
- Log with time
- Show the live height
- Plot after the trip
Common questions
What parts do I need for the altitude trip logger?
Arduino Nano, BMP280 pressure sensor, MicroSD Card Module, DS3231 RTC module, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the altitude trip logger take to build?
About 240 minutes for a intermediate maker.
