12 V solenoid water valve
Mains-pressure water valve that opens when powered.
TypeSolenoid valve, normally closed
Supply voltage12 V DC
CurrentAbout 0.4 to 0.5 A
ControlRelay or MOSFET with a flyback diode
Motors & ActuatorsReviewedMPN 1/2 inch solenoid valveUsed in 6 projects
In short
What is the 12 V solenoid water valve and what is it used for?
Mains-pressure water valve that opens when powered. Makers use it for garden irrigation.
How it works
The coil lifts a plunger that opens a diaphragm, letting water flow. It is closed with no power.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Solenoid valve, normally closed |
| Supply voltage | 12 V DC |
| Current | About 0.4 to 0.5 A |
| Control | Relay or MOSFET with a flyback diode |
| Watch out for | Needs some water pressure to seal |
Pinout
Two terminals12 V DC coil (no polarity on most)
How to use it
Switch with a relay or MOSFET and a flyback diode. Many cheap plastic valves need some water pressure (often about 0.02 MPa) to open fully, so a low gravity tank may only trickle.
Applications
Garden irrigation
Builds that use it
Alternatives
- 12 V DC water pump (diaphragm)Pump instead
Common questions
What is the 12 V solenoid water valve used for?
In maker projects: garden irrigation.
How does the 12 V solenoid water valve work?
The coil lifts a plunger that opens a diaphragm, letting water flow. It is closed with no power.
What voltage does the 12 V solenoid water valve need?
12 V DC.
What can I use instead of the 12 V solenoid water valve?
12 V DC water pump (diaphragm) and Relay module 1-channel 12 V.
