Projects / Ideas / Gas leak shut-off for a workshop

Gas leak shut-off for a workshop

IntermediateIndustrialIdeaReviewed
In short

How do you build a gas leak shut-off for a workshop?

A gas sensor shuts a solenoid valve, cuts ignition sources and sounds an alarm on a leak. You need Arduino Nano, MQ-5 LPG sensor module, 12 V solenoid water valve, Relay module 2-channel 5 V, Buzzer 12 V continuous (piezo alarm) and 12 V 2 A DC adapter.

Level
Intermediate
Time
About 150 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a safety shut-off chain.

Parts list

How to build it

  1. Warm the sensor
  2. Set a threshold
  3. Close the valve and cut power
  4. Sound the alarm
  5. Need a manual reset and certified gas parts for real use

Related projects

Common questions

What parts do I need for the gas leak shut-off for a workshop?

Arduino Nano, MQ-5 LPG sensor module, 12 V solenoid water valve, Relay module 2-channel 5 V, Buzzer 12 V continuous (piezo alarm) and 12 V 2 A DC adapter. 12 V solenoid water valve: Use a gas-rated valve.

How long does the gas leak shut-off for a workshop take to build?

About 150 minutes for a intermediate maker.