12 V DC water pump (diaphragm)
Small diaphragm pump that can lift water.
TypeDiaphragm pump
Supply voltage6 to 12 V
CurrentAbout 0.5 to 1 A
Torque or outputAbout 1.5 to 2 L/min
Motors & ActuatorsReviewedMPN 385 / R385 pumpUsed in 5 projects
In short
What is the 12 V DC water pump (diaphragm) and what is it used for?
Small diaphragm pump that can lift water. Makers use it for aquariums, dispensers.
How it works
A motor-driven diaphragm and check valves push water in pulses.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Diaphragm pump |
| Supply voltage | 6 to 12 V |
| Current | About 0.5 to 1 A |
| Torque or output | About 1.5 to 2 L/min |
| Control | MOSFET or relay |
Pinout
Red+
Black-
How to use it
It is self-priming and can lift water from a tank. Switch with a MOSFET or relay and add a flyback diode. Do not run it dry for long.
Applications
Aquariumsdispensers
Builds that use it
Alternatives
- Mini submersible water pump (3 to 6 V)Smaller, must be submerged
- Peristaltic pump 12 VPrecise dosing
Common questions
What is the 12 V DC water pump (diaphragm) used for?
In maker projects: aquariums, dispensers.
How does the 12 V DC water pump (diaphragm) work?
A motor-driven diaphragm and check valves push water in pulses.
What voltage does the 12 V DC water pump (diaphragm) need?
6 to 12 V.
What can I use instead of the 12 V DC water pump (diaphragm)?
Mini submersible water pump (3 to 6 V) and Peristaltic pump 12 V.
