Idea
In short
How do you build a single zone sprinkler valve controller?
A low-voltage valve opens for a set time each morning to water a small bed. You need Arduino Nano, 12 V solenoid water valve, MOSFET IRLZ44N, Rectifier Diode 1N4007, DS3231 RTC module, 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Time a water valve safely.
Parts list
- Development Boards
- Motors & Actuators
- Semiconductors
- Semiconductors
- Sensors
- Power
- Passives
- Prototyping
How to build it
- Read the valve current notes
- Switch with a MOSFET and flyback diode
- Schedule a run
- Add a maximum run time
- Add a manual button
Common questions
What parts do I need for the single zone sprinkler valve controller?
Arduino Nano, 12 V solenoid water valve, MOSFET IRLZ44N, Rectifier Diode 1N4007, DS3231 RTC module, 12 V 2 A DC adapter, Fuse 1 A glass (5 × 20 mm) and Breadboard 830 Tie Points.
How long does the single zone sprinkler valve controller take to build?
About 300 minutes for a advanced maker.
