Idea
In short
How do you build a steady 5 V from a draining pack?
A buck-boost module holds a steady 5 V even as a 9 V battery runs down. Set the output with a multimeter before connecting anything. You need DC-DC buck-boost module (XL6009 SEPIC), 9 V battery, 9 V battery snap with DC jack, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Hold 5 V from a battery.
Parts list
- Power
- Batteries
- Power
- Semiconductors
- Passives
- Prototyping
How to build it
- Check the module markings
- Set 5 V with no load
- Add an LED load
- Measure at lower input
- Note efficiency
Common questions
What parts do I need for the steady 5 V from a draining pack?
DC-DC buck-boost module (XL6009 SEPIC), 9 V battery, 9 V battery snap with DC jack, LED 5 mm red, Resistor 330 Ω and Breadboard 830 Tie Points.
How long does the steady 5 V from a draining pack take to build?
About 150 minutes for a intermediate maker.
