Idea
In short
How do you build a high-side switch lab?
A P-channel MOSFET switches the positive side of a load, driven by a small transistor from the Uno. You need Arduino Nano, IRF4905 P-channel MOSFET, NPN Transistor 2N2222, Resistor 10 kΩ, Resistor 1 kΩ, LED 5 mm red × 3, Resistor 220 Ω × 3, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 10
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Switch the positive side.
Parts list
- Development Boards
- Semiconductors
- Semiconductors
- Passives
- Passives
- SemiconductorsLED 5 mm red × 3
- PassivesResistor 220 Ω × 3
- Batteries
- Power
- Prototyping
How to build it
- Learn why high-side is useful
- Wire the drive transistor
- Wire the MOSFET and load
- Add a pull-up
- Test with a button
Common questions
What parts do I need for the high-side switch lab?
Arduino Nano, IRF4905 P-channel MOSFET, NPN Transistor 2N2222, Resistor 10 kΩ, Resistor 1 kΩ, LED 5 mm red × 3, Resistor 220 Ω × 3, 9 V battery, 9 V battery snap with DC jack and Breadboard 830 Tie Points.
How long does the high-side switch lab take to build?
About 210 minutes for a intermediate maker.
