Idea
In short
How do you build a lab power supply with a buck module?
A buck converter module with current limit becomes a small bench supply in a box with a meter. You need XL4015 5 A buck converter module, INA219 Current Monitor, Arduino Nano, SSD1306 OLED Display, Fuse 5 A glass (5 × 20 mm), Fuse holder (panel, 5 × 20 mm), 12 V 2 A DC adapter and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 300 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a safe low-voltage bench supply.
Parts list
- Power
- Sensors
- Development Boards
- Displays
- Passives
- Passives
- Power
- Prototyping
How to build it
- Set the output voltage
- Set the current limit
- Add a meter
- Fuse the input
- Test with a resistive load
Common questions
What parts do I need for the lab power supply with a buck module?
XL4015 5 A buck converter module, INA219 Current Monitor, Arduino Nano, SSD1306 OLED Display, Fuse 5 A glass (5 × 20 mm), Fuse holder (panel, 5 × 20 mm), 12 V 2 A DC adapter and Breadboard 830 Tie Points.
How long does the lab power supply with a buck module take to build?
About 300 minutes for a advanced maker.
