Projects / Ideas / Step-down with a voltage display

Step-down with a voltage display

IntermediatePowerIdeaReviewed
In short

How do you build a step-down with a voltage display?

A buck module makes an adjustable output, and a small display shows the output voltage while you tune it. You need LM2596 Buck Module, Arduino Nano, SSD1306 OLED Display, Resistor 10 kΩ × 2, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 180 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Tune and display a supply.

How to build it

  1. Set the module off the circuit
  2. Build a divider for the Nano
  3. Read the output
  4. Show it on the display
  5. Check line regulation

Related projects

Common questions

What parts do I need for the step-down with a voltage display?

LM2596 Buck Module, Arduino Nano, SSD1306 OLED Display, Resistor 10 kΩ × 2, 12 V 2 A DC adapter and Breadboard 830 Tie Points.

How long does the step-down with a voltage display take to build?

About 180 minutes for a intermediate maker.