Components / Crystals, fuses and other passives / Fuse holder (panel, 5 × 20 mm)

Fuse holder (panel, 5 × 20 mm)

Screw-cap holder for 5 × 20 mm fuses.

ValueUp to 10 A
PackagePanel mount
PassivesReviewedMPN 5x20 panel holderUsed in 5 projects
In short

What is the Fuse holder (panel, 5 × 20 mm) and what is it used for?

Screw-cap holder for 5 × 20 mm fuses. Makers use it for enclosure fuses.

How it works

A screw-cap holder for 5 × 20 mm glass or ceramic fuses.

Key specifications

Passive component specValue
ValueUp to 10 A
PackagePanel mount

Pinout

Two tagsLive in and out

How to use it

Mount in a panel hole and wire the incoming live to the rear (end) tag, so the exposed cap is dead when the fuse is out. Insulate the tags with heat-shrink.

Applications

Alternatives

Buy at

Common questions

What is the Fuse holder (panel, 5 × 20 mm) used for?

In maker projects: enclosure fuses.

How does the Fuse holder (panel, 5 × 20 mm) work?

A screw-cap holder for 5 × 20 mm glass or ceramic fuses.

What can I use instead of the Fuse holder (panel, 5 × 20 mm)?

Fuse 1 A glass (5 × 20 mm).