Projects / Ideas / Model wind turbine power curve

Model wind turbine power curve

IntermediatePowerIdeaReviewed
In short

How do you build a model wind turbine power curve?

A small motor with paper blades turns in the air from a desk fan at three speeds, and a current monitor measures the electrical power it makes into a small load. Plot power against wind speed to see why power rises so quickly with speed. Guard the fan and keep fingers away from the blades. You need Arduino Nano, DC motor 130 size (toy motor), INA219 Current Monitor, Resistor 220 Ω, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

Level
Intermediate
Time
About 100 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Measure the power from a model turbine.

How to build it

  1. Fit blades to a small motor
  2. Measure voltage and current into a small load
  3. Try three fan speeds
  4. Work out the power each time
  5. Plot power against fan speed

Related projects

Common questions

What parts do I need for the model wind turbine power curve?

Arduino Nano, DC motor 130 size (toy motor), INA219 Current Monitor, Resistor 220 Ω, SSD1306 OLED Display, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).

How long does the model wind turbine power curve take to build?

About 100 minutes for a intermediate maker.