Idea
In short
How do you build a regenerative braking demo?
A motor acts as a generator when slowed, charging a capacitor to show energy recovery. You need Arduino Nano, Johnson geared motor 300 RPM 12 V, L298N Dual H-Bridge Module, Supercapacitor 5.5 V 1 F, INA219 Current Monitor and 12 V 2 A DC adapter.
- Level
- Advanced
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
See regeneration.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Power
- Sensors
- Power
How to build it
- Spin up the motor
- Disconnect drive
- Capture the back EMF in a capacitor
- Measure energy
- Compare with braking by short-circuit
Common questions
What parts do I need for the regenerative braking demo?
Arduino Nano, Johnson geared motor 300 RPM 12 V, L298N Dual H-Bridge Module, Supercapacitor 5.5 V 1 F, INA219 Current Monitor and 12 V 2 A DC adapter.
How long does the regenerative braking demo take to build?
About 240 minutes for a advanced maker.
