Idea
In short
How do you build a pond skimmer robot?
A floating boat with solar panels skims leaves off a pond, steered by two thrusters. You need ESP32 DevKit V1, Solar panel 12 V 10 W, PWM solar charge controller 10 A, 12 V 7 Ah sealed lead acid battery, MX1508 dual motor driver, N20 gear motor with encoder × 2, HC-SR04 Ultrasonic Sensor and Waterproof enclosure IP65 (junction box).
- Level
- Advanced
- Time
- About 600 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Build a solar-powered surface robot.
Parts list
- Development Boards
- Power
- Power
- Batteries
- Motor Drivers
- Motors & Actuators
- Sensors
- Mechanical & Hardware
How to build it
- Seal the electronics
- Drive two propellers
- Avoid the edge with ultrasonic sensors
- Charge from the panel
- Test in a small pond
Common questions
What parts do I need for the pond skimmer robot?
ESP32 DevKit V1, Solar panel 12 V 10 W, PWM solar charge controller 10 A, 12 V 7 Ah sealed lead acid battery, MX1508 dual motor driver, N20 gear motor with encoder × 2, HC-SR04 Ultrasonic Sensor and Waterproof enclosure IP65 (junction box).
How long does the pond skimmer robot take to build?
About 600 minutes for a advanced maker.
