Idea
In short
How do you build a wi-Fi smart button?
A single button on an ESP32 sends a webhook to your own server to trigger an action like a log entry. You need ESP32 DevKit V1, Tactile push button 6 mm, Resistor 10 kΩ, Li-Po battery 3.7 V 1000 mAh, TP4056 Charging Module, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Call a web endpoint from a microcontroller.
Parts list
- Development Boards
- Switches
- Passives
- Batteries
- Power
- Prototyping
- Prototyping
How to build it
- Connect to Wi-Fi from stored settings
- Send an HTTP request on press
- Go to deep sleep between presses
- Keep secrets out of the code
- Add a charging module with protection
Common questions
What parts do I need for the wi-Fi smart button?
ESP32 DevKit V1, Tactile push button 6 mm, Resistor 10 kΩ, Li-Po battery 3.7 V 1000 mAh, TP4056 Charging Module, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the wi-Fi smart button take to build?
About 210 minutes for a intermediate maker.
