Projects / Ideas / Wrist step counter

Wrist step counter

IntermediateWearablesIdeaReviewed
In short

How do you build a wrist step counter?

An accelerometer counts steps and shows the total on a tiny screen. You need Arduino Nano, ADXL345 accelerometer, 0.91 inch OLED 128x32 (I2C), Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

Level
Intermediate
Time
About 210 min
Parts
6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Detect steps from acceleration peaks.

How to build it

  1. Read acceleration
  2. Remove gravity with a filter
  3. Detect peaks
  4. Count steps
  5. Show the total and reset daily

Related projects

Common questions

What parts do I need for the wrist step counter?

Arduino Nano, ADXL345 accelerometer, 0.91 inch OLED 128x32 (I2C), Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.

How long does the wrist step counter take to build?

About 210 minutes for a intermediate maker.