Idea
In short
How do you build a silent reminder wristband?
A small band vibrates at set times to remind you to stand, drink or take a break. You need Arduino Nano, DS3231 RTC module, Vibration motor (coin type), NPN Transistor 2N2222, Resistor 1 kΩ, Rectifier Diode 1N4007, Li-Po battery 3.7 V 500 mAh and TP4056 module with protection (USB-C).
- Level
- Beginner
- Time
- About 180 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Schedule a vibration with an RTC.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Semiconductors
- Passives
- Semiconductors
- Batteries
- Power
How to build it
- Set reminder times
- Drive the motor with a transistor
- Add a flyback diode
- Add a snooze button
- Save battery with sleep
Related projects
Common questions
What parts do I need for the silent reminder wristband?
Arduino Nano, DS3231 RTC module, Vibration motor (coin type), NPN Transistor 2N2222, Resistor 1 kΩ, Rectifier Diode 1N4007, Li-Po battery 3.7 V 500 mAh and TP4056 module with protection (USB-C).
How long does the silent reminder wristband take to build?
About 180 minutes for a beginner maker.
