0.91 inch OLED 128x32 (I2C)
Thin strip OLED for small status lines.
TypeMonochrome OLED
Size0.91 inch
Resolution128 × 32
Driver ICSSD1306
DisplaysReviewedMPN SSD1306 128x32Used in 7 projects
In short
What is the 0.91 inch OLED 128x32 (I2C) and what is it used for?
Thin strip OLED for small status lines. Makers use it for wearables, small gadgets.
How it works
An SSD1306 driving a 128 × 32 OLED strip.
Key specifications
| Display spec | Value |
|---|---|
| Type | Monochrome OLED |
| Size | 0.91 inch |
| Resolution | 128 × 32 |
| Driver IC | SSD1306 |
| Interface | I2C |
| I2C address | 0x3C |
| Supply voltage | 3.3 to 5 V |
Pinout
GNDGround
VCC3.3 to 5 V
SCL SDAI2C at 0x3C
How to use it
Use Adafruit_SSD1306 with a height of 32, or U8g2's 128x32 constructor. Fine for two lines of large text or four lines of small text.
Applications
Wearablessmall gadgets
Builds that use it
Alternatives
- SSD1306 OLED DisplayTaller 128 × 64
- 0.49 inch micro OLED (64x32)Even smaller
Common questions
What is the 0.91 inch OLED 128x32 (I2C) used for?
In maker projects: wearables, small gadgets.
How does the 0.91 inch OLED 128x32 (I2C) work?
An SSD1306 driving a 128 × 32 OLED strip.
What voltage does the 0.91 inch OLED 128x32 (I2C) need?
3.3 to 5 V.
How do I connect the 0.91 inch OLED 128x32 (I2C) to an Arduino or ESP32?
I2C. Pins: GND (Ground), VCC (3.3 to 5 V), SCL SDA (I2C at 0x3C).
What can I use instead of the 0.91 inch OLED 128x32 (I2C)?
SSD1306 OLED Display and 0.49 inch micro OLED (64x32).
