Idea
In short
How do you build a sun exposure UV reminder?
A clip-on UV sensor warns you with a beep when sun exposure is high, for general awareness only. You need Arduino Nano, VEML6070 UV sensor, Passive buzzer, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Read a UV sensor and warn at thresholds.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Batteries
- Power
- Prototyping
How to build it
- Read UV values in sunlight
- Map to levels
- Beep above a chosen level
- Save battery with sleep
- Treat it as an indicator, not a safety device
Common questions
What parts do I need for the sun exposure UV reminder?
Arduino Nano, VEML6070 UV sensor, Passive buzzer, Li-Po battery 3.7 V 500 mAh, TP4056 module with protection (USB-C) and Breadboard 830 Tie Points.
How long does the sun exposure UV reminder take to build?
About 150 minutes for a beginner maker.
