Projects / Ideas / Wearable thermal viewer

Wearable thermal viewer

AdvancedWearablesIdeaReviewed
In short

How do you build a wearable thermal viewer?

A wrist-worn thermal sensor shows hot spots, useful for electronics and cooking. You need ESP32 DevKit V1, MLX90640 thermal camera, 1.69 inch TFT (ST7789, 240x280), Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).

Level
Advanced
Time
About 300 min
Parts
5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Show thermal images on a wrist display.

How to build it

  1. Read the sensor
  2. Colour-map
  3. Mark hottest point
  4. Freeze with a button
  5. Case it for the wrist

Related projects

Common questions

What parts do I need for the wearable thermal viewer?

ESP32 DevKit V1, MLX90640 thermal camera, 1.69 inch TFT (ST7789, 240x280), Li-Po battery 3.7 V 1000 mAh and TP4056 module with protection (USB-C).

How long does the wearable thermal viewer take to build?

About 300 minutes for a advanced maker.