Idea
In short
How do you build a haptic compass belt?
Eight vibration motors around a belt buzz towards north or towards your next turn from phone GPS. You need ESP32 DevKit V1, HMC5883L / QMC5883L compass module, Vibration motor (coin type) × 8, ULN2003A Darlington array IC, Li-Po battery 3.7 V 2000 mAh and TP4056 module with protection (USB-C).
- Level
- Advanced
- Time
- About 360 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Fuse a compass reading with directions and drive many motors.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Integrated Circuits
- Batteries
- Power
How to build it
- Calibrate the compass
- Work out which motor faces north
- Drive the motors through a ULN2003
- Receive bearings from a phone over BLE
- Buzz gently, not constantly
Common questions
What parts do I need for the haptic compass belt?
ESP32 DevKit V1, HMC5883L / QMC5883L compass module, Vibration motor (coin type) × 8, ULN2003A Darlington array IC, Li-Po battery 3.7 V 2000 mAh and TP4056 module with protection (USB-C).
How long does the haptic compass belt take to build?
About 360 minutes for a advanced maker.
