N20 micro metal gear motor
Small metal geared motor, many speed options, optional encoder.
TypeBrushed DC gear motor
Supply voltage3 to 12 V by version
CurrentAbout 50 to 500 mA
Torque or output30 to 1000 RPM by gear ratio
Motors & ActuatorsReviewedMPN N20 gear motorUsed in 10 projects
In short
What is the N20 micro metal gear motor and what is it used for?
Small metal geared motor, many speed options, optional encoder. Makers use it for mini robots, locks.
How it works
A small brushed DC motor with a metal gearbox.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Brushed DC gear motor |
| Supply voltage | 3 to 12 V by version |
| Current | About 50 to 500 mA |
| Torque or output | 30 to 1000 RPM by gear ratio |
| Control | H-bridge (DRV8833, TB6612) |
Pinout
Two terminalsSwap to reverse
Shaft3 mm D-shaft
How to use it
Choose the voltage and RPM version that fits your robot. Drive it with a DRV8833 or TB6612.
Applications
Mini robotslocks
Builds that use it
Guided build
Bath-tub Bluetooth boat
Guided build
Fast PID line follower with 8 sensors
Guided build
Mini sumo robot
Guided build
Mini robot vacuum with bump sensors
Guided build
Pico N20 motor speed knob
Idea
Pipe inspection crawler
Idea
Wall-climbing robot with a suction fan
Idea
Tiny obstacle avoiding car
Showing 8 of 10
Alternatives
- N20 gear motor with encoderAdds an encoder
Common questions
What is the N20 micro metal gear motor used for?
In maker projects: mini robots, locks.
How does the N20 micro metal gear motor work?
A small brushed DC motor with a metal gearbox.
What voltage does the N20 micro metal gear motor need?
3 to 12 V by version.
What can I use instead of the N20 micro metal gear motor?
N20 gear motor with encoder and DRV8833 dual motor driver.
