Projects / Ideas / Strandbeest walking robot

Strandbeest walking robot

IntermediateMotionIdeaReviewed
In short

How do you build a strandbeest walking robot?

A 3D-printed Theo Jansen linkage turned by one geared motor per side walks smoothly, showing how linkages turn rotation into steps. You need Arduino Nano, TB6612FNG Motor Driver, JGA25-370 encoder gear motor × 2, HC-05 Bluetooth Module, Battery holder 18650 2S (series), 18650 cell 2600 mAh (branded) × 2 and 3D printer PLA filament 1.75 mm (1 kg).

Level
Intermediate
Time
About 480 min
Parts
7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal

Build a linkage from given ratios and drive it with motors.

How to build it

  1. Print the linkage parts using Jansen's lengths
  2. Assemble three leg pairs per side on a crank
  3. Drive each side with a geared motor
  4. Steer by speed difference from a Bluetooth app
  5. Watch the foot path traced by one leg

Related projects

Common questions

What parts do I need for the strandbeest walking robot?

Arduino Nano, TB6612FNG Motor Driver, JGA25-370 encoder gear motor × 2, HC-05 Bluetooth Module, Battery holder 18650 2S (series), 18650 cell 2600 mAh (branded) × 2 and 3D printer PLA filament 1.75 mm (1 kg).

How long does the strandbeest walking robot take to build?

About 480 minutes for a intermediate maker.