Battery holder 18650 2S (series)
Holder for two 18650 cells in series (7.4 V).
FunctionBattery holder
Output voltage7.4 V nominal, 8.4 V full
PowerReviewedMPN 18650 holder 2SUsed in 18 projects
In short
What is the Battery holder 18650 2S (series) and what is it used for?
Holder for two 18650 cells in series (7.4 V). Makers use it for robot power.
Add a 2S BMS
How it works
Two cells in series.
Key specifications
| Power module spec | Value |
|---|---|
| Function | Battery holder |
| Output voltage | 7.4 V nominal, 8.4 V full |
Pinout
RedPositive (8.4 V full)
BlackNegative
How to use it
Add a 2S BMS for charging. Use matched cells at the same voltage.
Applications
Robot power
Builds that use it
Guided build
Line follower robot
Guided build
Bluetooth RC car
Guided build
Two-wheel self-balancing robot
Guided build
Table-top robot that never falls off
Guided build
Light-seeking robot
Guided build
RC car with an ESP-NOW handheld remote
Guided build
Hand gesture controlled robot
Guided build
Voice-controlled robot car
Showing 8 of 18
Alternatives
- BMS 2S 10 A (7.4 V Li-ion)Protection board
Common questions
What is the Battery holder 18650 2S (series) used for?
In maker projects: robot power.
How does the Battery holder 18650 2S (series) work?
Two cells in series.
What can I use instead of the Battery holder 18650 2S (series)?
BMS 2S 10 A (7.4 V Li-ion).
