JGA25-370 encoder gear motor
Metal gear motor with a Hall encoder, good for balancing robots.
TypeBrushed DC gear motor + encoder
Supply voltage6 or 12 V
Torque or outputMany RPM options
ControlH-bridge plus encoder
Motors & ActuatorsReviewedMPN JGA25-370Used in 3 projects
In short
What is the JGA25-370 encoder gear motor and what is it used for?
Metal gear motor with a Hall encoder, good for balancing robots. Makers use it for self-balancing robots.
How it works
A 25 mm gear motor with a Hall quadrature encoder on the motor shaft.
Key specifications
| Motor or actuator spec | Value |
|---|---|
| Type | Brushed DC gear motor + encoder |
| Supply voltage | 6 or 12 V |
| Torque or output | Many RPM options |
| Control | H-bridge plus encoder |
Pinout
Motor + -Power
Encoder VCC GND3.3 to 5 V
A BQuadrature outputs
How to use it
Use for line followers and balancing robots that need speed feedback. Read the encoder with interrupts and drive the motor with a TB6612 or L298N.
Applications
Self-balancing robots
Builds that use it
Alternatives
- N20 gear motor with encoderSmaller
- Johnson geared motor 300 RPM 12 VMore torque
Common questions
What is the JGA25-370 encoder gear motor used for?
In maker projects: self-balancing robots.
How does the JGA25-370 encoder gear motor work?
A 25 mm gear motor with a Hall quadrature encoder on the motor shaft.
What voltage does the JGA25-370 encoder gear motor need?
6 or 12 V.
What can I use instead of the JGA25-370 encoder gear motor?
N20 gear motor with encoder and Johnson geared motor 300 RPM 12 V.
