Idea
In short
How do you build an USB serial adapter tester?
A loopback jig checks that a USB-to-serial adapter's TX and RX work at several speeds. You need USB to TTL adapter (CH340G), FTDI FT232RL USB to TTL adapter, Jumper wires male to female (40 pcs) and Breadboard 830 Tie Points.
- Level
- Beginner
- Time
- About 80 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Test serial adapters quickly.
Parts list
- Interfaces
- Interfaces
- Prototyping
- Prototyping
How to build it
- Short TX to RX
- Send a test string
- Compare at several baud rates
- Test the 3.3 V and 5 V pins
- Record the results
Common questions
What parts do I need for the USB serial adapter tester?
USB to TTL adapter (CH340G), FTDI FT232RL USB to TTL adapter, Jumper wires male to female (40 pcs) and Breadboard 830 Tie Points.
How long does the USB serial adapter tester take to build?
About 80 minutes for a beginner maker.
