Idea
In short
How do you build a low-voltage current sensor lab?
A Hall current sensor measures a low-voltage load, such as a motor on a battery, and shows the current and the start-up surge. Low voltage only. You need Arduino Nano, ACS712 current sensor module (5 A / 20 A / 30 A), DC motor 130 size (toy motor), 5 V 2 A USB adapter, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure current with a Hall sensor.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Power
- Displays
- Prototyping
How to build it
- Wire the sensor in series with the motor
- Zero the offset
- Read current
- Capture the start-up peak
- Show current and peak
Related projects
Common questions
What parts do I need for the low-voltage current sensor lab?
Arduino Nano, ACS712 current sensor module (5 A / 20 A / 30 A), DC motor 130 size (toy motor), 5 V 2 A USB adapter, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the low-voltage current sensor lab take to build?
About 240 minutes for a intermediate maker.
