Components / Interface and audio modules / FTDI FT232RL USB to TTL adapter

FTDI FT232RL USB to TTL adapter

Reliable USB serial adapter with a 3.3/5 V switch.

FunctionUSB to UART
Supply voltageUSB 5 V
InterfaceTX, RX, DTR, CTS
Logic level3.3 or 5 V
InterfacesReviewedMPN FT232RL moduleUsed in 2 projects
FT232R
In short

What is the FTDI FT232RL USB to TTL adapter and what is it used for?

Reliable USB serial adapter with a 3.3/5 V switch. Makers use it for pro Mini programming.

How it works

An FTDI FT232RL USB-to-UART chip.

Key specifications

Interface module specValue
FunctionUSB to UART
Supply voltageUSB 5 V
InterfaceTX, RX, DTR, CTS
Logic level3.3 or 5 V

Pinout

DTRAuto-reset (Pro Mini GRN)
RX TXSerial
VCC3.3 or 5 V by jumper
CTSFlow control
GNDGround

How to use it

Its 6-pin header matches the Arduino Pro Mini. Some cheap boards carry counterfeit chips that the official FTDI driver refuses, so buy from a trusted shop.

Applications

Alternatives

Buy at

Common questions

What is the FTDI FT232RL USB to TTL adapter used for?

In maker projects: pro Mini programming.

How does the FTDI FT232RL USB to TTL adapter work?

An FTDI FT232RL USB-to-UART chip.

What voltage does the FTDI FT232RL USB to TTL adapter need?

USB 5 V.

How do I connect the FTDI FT232RL USB to TTL adapter to an Arduino or ESP32?

TX, RX, DTR, CTS. Pins: DTR (Auto-reset (Pro Mini GRN)), RX TX (Serial), VCC (3.3 or 5 V by jumper), CTS (Flow control), GND (Ground).

What can I use instead of the FTDI FT232RL USB to TTL adapter?

USB to TTL adapter (CH340G).