Idea
In short
How do you build a sine wave maker?
The 12-bit analogue output of a newer Uno draws a sine wave that a filter smooths for use on an oscilloscope or amplifier. You need Arduino Uno R4 Minima, Resistor 1 kΩ, Resistor 10 kΩ, Ceramic Capacitor 100 nF and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 210 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Generate a sine wave.
Parts list
- Development Boards
- Passives
- Passives
- Passives
- Prototyping
How to build it
- Build a sine table
- Output samples
- Add a simple filter
- View on a scope
- Change the frequency
Common questions
What parts do I need for the sine wave maker?
Arduino Uno R4 Minima, Resistor 1 kΩ, Resistor 10 kΩ, Ceramic Capacitor 100 nF and Breadboard 830 Tie Points.
How long does the sine wave maker take to build?
About 210 minutes for a intermediate maker.
