Idea
In short
How do you build an uno R4 thermocouple thermometer?
An Uno R4 Minima reads a MAX31855 thermocouple amplifier over SPI and shows the probe temperature and board temperature. For measuring hot objects only, not for controlling heaters; keep clear of hot surfaces. You need Arduino Uno R4 Minima, MAX31855 thermocouple amplifier, SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 140 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure high temperatures with a K-type probe.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Wire the amplifier over SPI
- Connect the probe observing polarity
- Read the temperature
- Flag open or shorted probe faults
- Show the value on the OLED
Common questions
What parts do I need for the uno R4 thermocouple thermometer?
Arduino Uno R4 Minima, MAX31855 thermocouple amplifier, SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the uno R4 thermocouple thermometer take to build?
About 140 minutes for a intermediate maker.
