Idea
In short
How do you build an uno R4 DC current meter?
An Uno R4 Minima reads an ACS712 current sensor, shows low-voltage DC current on an OLED and holds the peak. Low voltage DC loads only; keep within the sensor's range. You need Arduino Uno R4 Minima, ACS712 current sensor module (5 A / 20 A / 30 A), SSD1306 OLED Display and Breadboard 830 Tie Points.
- Level
- Intermediate
- Time
- About 140 min
- Parts
- 4
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure how much current a small project draws.
Parts list
- Development Boards
- Sensors
- Displays
- Prototyping
How to build it
- Put the sensor in series with the load
- Read the zero level with no current
- Convert the reading to amps
- Hold the peak
- Show on the OLED
Common questions
What parts do I need for the uno R4 DC current meter?
Arduino Uno R4 Minima, ACS712 current sensor module (5 A / 20 A / 30 A), SSD1306 OLED Display and Breadboard 830 Tie Points.
How long does the uno R4 DC current meter take to build?
About 140 minutes for a intermediate maker.
