Idea
In short
How do you build a product photo turntable?
A stepper turns a platform in fixed angles and pauses for a photo at each position. You need Arduino Uno R3, NEMA 17 stepper motor, A4988 stepper driver, 12 V 2 A DC adapter, Electrolytic Capacitor 100 µF, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
- Level
- Intermediate
- Time
- About 240 min
- Parts
- 8
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Make precise rotations with a stepper driver.
Parts list
- Development Boards
- Motors & Actuators
- Motor Drivers
- Power
- Passives
- Switches
- Prototyping
- Prototyping
How to build it
- Set the driver current limit
- Rotate in fixed steps
- Pause for each photo
- Add a speed knob
- Add a home button
Common questions
What parts do I need for the product photo turntable?
Arduino Uno R3, NEMA 17 stepper motor, A4988 stepper driver, 12 V 2 A DC adapter, Electrolytic Capacitor 100 µF, Tactile push button 6 mm, Breadboard 830 Tie Points and Jumper wires male to male (40 pcs, 20 cm).
How long does the product photo turntable take to build?
About 240 minutes for a intermediate maker.
