Idea
In short
How do you build a pond water clarity monitor?
A turbidity sensor floats at the surface and reports cloudy water for aquaponics or ponds. You need ESP32 DevKit V1, Turbidity sensor module, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module and Li-Po battery 3.7 V 2000 mAh.
- Level
- Intermediate
- Time
- About 180 min
- Parts
- 5
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure clarity of water.
Parts list
- Development Boards
- Sensors
- Power
- Power
- Batteries
How to build it
- Read the sensor voltage
- Calibrate with clear and cloudy water
- Convert to NTU roughly
- Send over Wi-Fi
- Run on solar
Common questions
What parts do I need for the pond water clarity monitor?
ESP32 DevKit V1, Turbidity sensor module, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module and Li-Po battery 3.7 V 2000 mAh.
How long does the pond water clarity monitor take to build?
About 180 minutes for a intermediate maker.
