Idea
In short
How do you build a snow water equivalent sensor?
A pressure pillow under snow estimates how much water is stored in the snowpack. You need ESP32 DevKit V1, Load cell 20 kg × 4, HX711 load cell amplifier × 2, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module and Li-Po battery 3.7 V 2000 mAh.
- Level
- Advanced
- Time
- About 480 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Measure weight of snow.
Parts list
- Development Boards
- SensorsLoad cell 20 kg × 4
- Sensors
- Power
- Power
- Batteries
How to build it
- Build a flat plate with load cells
- Calibrate
- Log daily
- Subtract plate weight
- Send by LoRa
Common questions
What parts do I need for the snow water equivalent sensor?
ESP32 DevKit V1, Load cell 20 kg × 4, HX711 load cell amplifier × 2, Solar panel 6 V 1 W, CN3065 solar Li-ion charger module and Li-Po battery 3.7 V 2000 mAh.
How long does the snow water equivalent sensor take to build?
About 480 minutes for a advanced maker.
