Idea
In short
How do you build a pool alarm for children?
A floating sensor detects waves from a fall and sounds an alarm at the house. You need ESP32 DevKit V1, MPU6050 IMU, Active buzzer 5 V, Waterproof enclosure IP65 (junction box), Solar panel 6 V 1 W, CN3065 solar Li-ion charger module and Li-Po battery 3.7 V 2000 mAh.
- Level
- Intermediate
- Time
- About 300 min
- Parts
- 7
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Detect disturbance on water.
Parts list
- Development Boards
- Sensors
- Motors & Actuators
- Mechanical & Hardware
- Power
- Power
- Batteries
How to build it
- Float the sensor in a sealed housing
- Detect sudden movement
- Ignore wind chop
- Send an alarm to a base unit
- Test often
Common questions
What parts do I need for the pool alarm for children?
ESP32 DevKit V1, MPU6050 IMU, Active buzzer 5 V, Waterproof enclosure IP65 (junction box), Solar panel 6 V 1 W, CN3065 solar Li-ion charger module and Li-Po battery 3.7 V 2000 mAh.
How long does the pool alarm for children take to build?
About 300 minutes for a intermediate maker.
