Idea
In short
How do you build a phase control dimmer study at low voltage?
Study phase-angle control on a safe 12 V AC transformer with a DIAC and TRIAC driving a 12 V bulb. You need BT136 triac, DB3 diac, Potentiometer 10 kΩ, Resistor 10 kΩ, Ceramic Capacitor 100 nF and Breadboard 830 Tie Points.
- Level
- Advanced
- Time
- About 150 min
- Parts
- 6
An idea, not a guided build yet. Goal, parts and steps; no wiring, code or tests. Copy it to My Garage to plan it.
Goal
Understand phase control without touching mains.
Parts list
- Semiconductors
- Semiconductors
- Passives
- Passives
- Passives
- Prototyping
How to build it
- Use a 12 V AC adapter only
- Build the RC phase shift network
- Trigger the TRIAC with the DIAC
- Watch the chopped wave on a scope
- Have a qualified electrician handle any mains version
Common questions
What parts do I need for the phase control dimmer study at low voltage?
BT136 triac, DB3 diac, Potentiometer 10 kΩ, Resistor 10 kΩ, Ceramic Capacitor 100 nF and Breadboard 830 Tie Points.
How long does the phase control dimmer study at low voltage take to build?
About 150 minutes for a advanced maker.
